2025 Bobcat® Electric E19E
- Year 2025
- Make Bobcat®
- Model Electric
2025 Bobcat® Electric E19E
Featuring state-of-the-art lithium-ion battery technology, the conventional tail-swing E19e provides the same power as its diesel-powered equivalents, with near-instantaneous torque.
Features may include:
- Two-speed travel with auto shift
- On-board charger accepts a common, 120-volt electrical connection
- Standard long arm
- Retractable undercarriage and retractable blade
- Auxiliary hydraulics with two-way flow
- With a small footprint, zero emissions and an in-track swing frame, the E19e can work on small outdoor jobsites as well as indoors, where the alternative is manual labor.
- The E19e is powered by three lithium-ion batteries that provide a total capacity of 17.28 kWh. The batteries deliver high-energy density, long service life and require no routine maintenance.
- The standard long-arm gives operators added reach and dig depth, while the increased cylinder size offers excellent breakout forces and lifting ability. Hydraulically retract the undercarriage to just 39-inches wide for access to small job sites - both indoors and out. Then return the undercarriage to its 54-inch stance for a wider footprint and leading performance. The blade also can be retracted at each side for greater access to jobsites.
Motor
							Motor Type
							SCHABMULLER
						
						Battery
							Battery
							Type: Lithium Ion
						
						
							Battery Capacity, Maximum
							Gross: 17.3 kwh
						
						
							Battery Charging Time
							Off-Board Charge Time: 2 h  
						
						Electric
							Electrical
							System Voltage: 51.8 v
						
						Operational
							Operating Conditions
							Estimated Run Time: 4 h | Arm Digging Force: 9279 n | Bucket Digging Force: 20835 n
						
						
							Operating Speed
							Travel - High: 3.6 kmh | Travel - Low: 1.7 kmh
						
						Performance
							Noise Level
							Interior Sound Level According to ISO 6396: 71 dB | External Sound Level According to ISO 6395: 81 dB
						
						Hydraulics
							Hydraulic Flow
							Auxiliary Std Flow: 24.3  l/min
						
						
							Maximum Pressure
							Auxiliary: 180 bar
						
						Dimensions
							Dimensions
							Maximum Reach at Ground Level: 4214 mm | Lift Radius: 3000 mm 
						
						
							Width
							980 mm
						
						
							Depth, Maximum
							Maximum Dig Depth: 2565 mm
						
						
							Height
							Max Dump: 2566 mm | 2299 mm | with Operator Cab: 2299 mm 
						
						
							Length
							3812 mm
						
						
							Overall Length
							Travel Position: 3812 mm
						
						Capacities
							Hitch Lift Capacity
							Rated Lift: 20835 kg
						
						Weights
							Weight, In Running Order
							Operating: 1910 kg
						
						
							Weight
							Class: 2 t 
						
					 
			